Reference Manual

Initial Setup

802.11ac Wireless Access Point Model WAC120

4. Select Configuration > System > Basic > Time.

5. Adjust the following fields:

• Time Zone. F

rom the list, select the local time zone for your access point. The default

is USA-Pacific. The access point gets the current time from the connecting computer.

• NTP Client. En

able the NTP client to synchronize the time of the access point with an

NTP server. The Enable radio button is selected by default.

Note: You n

eed an Internet connection to get the current time using an NTP

client.

• Use Custom NTP Server. Select

this check box if you use a custom NTP server. The

check box is cleared by default.

• Hostname / IP Address. Enter the ho

st name or the IP address of the custom NTP

server. The default is time-b.netgear.com.

6. Click the Apply

button.

Your settings are saved.

Configure the Basic IP Settings

The default settings work in most cases. However, if your access point is part of a more

complex LAN network, modify these settings to meet the requirements of your network.

You must use a computer that is configured with a static IP addre

ss of 192

.168.0.210 and a

subnet mask of 255.255.255.0. During initial setup, use a wired Ethernet connection from the

computer to the access point.

 To configure the basic IP settings:

1. Launch a web browser on the computer that is connected to the access point.

2. Enter http

://1

92.168.0.100 in the address field of the browser.

A login prompt displays.

3. Enter the user name and password.

The user name is

admin and t

he default password is password.