Reference Manual

Network Settings
34
802.11ac Wireless Access Point Model WAC120
4. Select Configuration > System > Advanced > General.
5. Select the Spanning Tree Protocol Enable or Disable radio button.
6. To require all VLANs to be configured as tagged VLANs, clear the Un
tagged VLAN check
box.
7. To change the untagged VLAN value, enter the new value in the Unt
agged VLAN field.
8. To change the number of management VLANs, enter the new value in the Manageme
nt
VLAN field.
9. Click the Apply
button.
Your settings are saved.
Advanced Wireless Settings
The default wireless LAN parameters usually work well. However, you can use these settings
to fine-tune the overall performance of your access point for your environment.
 To configure advanced wireless settings:
1. Launch a web browser on the computer that is connected to the acc
ess point.
2. Enter http://192.168.0.
100 in the address field of the browser.
A login prompt displays.
3. Enter the user name and password.
The us
er name is admi
n and the default password is password.
The General screen displays.