Reference Manual

Network Settings
42
802.11ac Wireless Access Point Model WAC120
• LAN address range. Each access point must be configured to operate in the same LAN
network address range as the LAN devices.
• DHCP. If you are using DHCP
, all access points must be set to obtain an IP address
automatically. See Configure the Basic IP Settings on pa
ge 15.
When the wireless bridge is completed, a computer on either LAN segment can connect to
the Internet and share files and
printers with any other computers or servers connected to
LAN Segment 1 or LAN Segment 2.
 To configure a point-to-point wireless bridge between two access points:
1. Launch a web browser on the computer that is connected to the fir
st access point.
2. Enter http://192.168.0.
100 in the address field of the browser.
A login prompt displays.
3. Enter the user name and password.
The us
er name is admi
n and the default password is password.
The General screen displays.
4. Select Configuration > Wireless Bridge.
5. Select the band that you want to use for the bridge:
• To set up the bridge on the 2.4 GHz band, click the 802.11b/bg/n
g tab.
• To set up the bridge on the 5 GHz band, click the 802.11a
/ag/na tab.
6. Select the Enable
Wireless Bridging check box.
7. Select the Wi
reless Point-to-Point Bridge radio button.
8. To enable wireless client association, select the Enable
Wireless Client Association check
box.