Reference Manual

Network Settings
46
802.11ac Wireless Access Point Model WAC120
• Only the base station access point is configured in wireless point-to-multi-point bridge
mode and all the other access points are in wireless point-to-point bridge mode.
• For all point-to-point access point, the MAC address of the base station a
ccess point
must be specified in their Remote AP MAC Address fields.
• All access points are con
figured to operate in the same LAN network address range
as the LAN devices.
• All access points use the same SSID, ch
annel, authentication mode, if any, and
encryption.
• If you are using DHCP, all the access point
s must be set to obtain an IP address
automatically. For more information, see Configure the Basic IP Settings on page 15
.
19. Verify connectivity across the LANs:
• A computer on an
y LAN segment can connect to the Internet and share files and
printers with any other computers or servers connected to any of the other LAN
segments.
• The wireless stations that you enable can connect to the access points. If you require
wireless statio
ns to access any LAN segment, you can add additional access points
configured in wireless bridge mode to any LAN segment.
Client Mode
In client mode, the access point operates as a client bridge only and sends traffic to the
selected remote access point or peer device.
 To configure the access point for client mode:
1. Launch a web browser on a computer that is connected to the access point.
2.
Enter http://192.168.0.
100 in the address field of the browser.
A login prompt displays.
3. Enter the user name and password.
The us
er name is admi
n and the default password is password.
The General screen displays.