Reference Manual

Network Settings

802.11ac Wireless Access Point Model WAC120

4. Select Configuration > Wireless Bridge.

5. Select the band that you want to use for the bridge:

• To set up the bridge on the 2.4 GHz band, click the 802.1

1b/bg/ng tab.

• To set up the bridge on the 5 GHz band, click the 802.1

1a/ag/na tab.

6. Select the Enable

Wireless Bridging check box.

7. Select the Client radio

button.

8. Enable the MAC clone feature.

The Disable radio button is selected by default. If you enable the MAC clone feature,

enter th

e MAC clone address.

9. Click the Apply butt

on.

Your settings are saved.