Reference Manual

Monitoring
57
802.11ac Wireless Access Point Model WAC120
• Wireless MAC Address for 5 GHz. The MAC address of the access point’s 5 GHz
wireless port.
• Band Steering. Indicates whether band steering is enabled or disabled.
• Country/Region.
The domain or region for which the access point is licensed for use.
It might not be legal to operate this access point in a region other than one of those
identified in this field.
• F
irmware Version. The
version of the firmware currently installed.
• Serial Number. The
serial number of the device.
• Current Time. T
he time setting for the access point.
The following current IPv4 settings information displays:
• IP Address. The
IP address of the access point.
• Subnet Mask. The subnet mask for the access point.
• Default Gateway. The de
fault gateway for the access point communication.
• DHCP Client. Enabled
indicates that the current IP address was obtained from a
DHCP server on your network. Disabled indicates a static IP configuration.
The following current wireless settings for each wireless band displ
ay:
• Operating Mode. Ident
ifies the 802.11 operating mode of the access point.
- Access Point
- Point-to-Point Bridge
- Point-to-Point Bridge with Access Point
- Multi-Point Bridge
• Channel / Frequency. Ide
ntifies the channel that the wireless port is using.
View Available Wireless Stations
You can view all IP devices associated with this access point in the wireless network defined
by the wireless network name (SSID). If your network includes more than one access point
sharing the same SSID, remember that you can view only the wireless stations associated
with this access point.
 To view the Available Wireless Stations list:
1. Launch a web browser on the computer that is connected to the access point.
2. Enter http
://192.168.0.100 in the address field of the browser.
A login prompt displays.
3. Enter the user name and password.
T
he user name is admin
and the default password is password.