Owners manual

Advanced Configuration
107
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
You can configure QoS policies for 802.11 bg/ng/bgn devices, 802.11 a/a-na-ac devices,
or both types of devices.
5. From the Create Policy menu, select NEW.
If you did not yet set up any QoS policies, NEW is the only selection possible.
6. In the Policy Name field, enter a name for the new QoS policy.
7. Specify a classification for the QoS policy as described in the following table.
Note: Depending on your selection from the Match Frame Fields menu,
Match Classifications appears either as a menu from which you must
make a selection or as a field in which you must enter information.
Setting Description
Match Frame
Fields and Match
Classifications
IP Precedence From the Match Classifications menu, select the DSCP traffic class
against which the information in the IP header must be matched:
• Routine(0)
• Priority(1)
• Immediate(2)
• Flash(3)
• Flash Override(4)
• Critic/CCP(5)
• Inter Control(6)
• Network Control(7)