Owners manual

Advanced Configuration
109
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
Match Frame
Fields and Match
Classifications
(continued)
Source MAC In the Match Classifications field, select or enter the source MAC
address against which the information in the IP header must be
matched.
To select the MAC address of a WiFi client that is connected to the
access point:
1. Select the radio button to the left of the Match Classifications
menu.
2. From the menu, select a MAC address.
To enter a MAC address:
1. Select the radio button to the right of the Match Classifications
menu.
2. In the field to the right of the radio button, enter a MAC address.
Destination
MAC
In the Match Classifications field, select or enter the destination MAC
address against which the information in the IP header must be
matched.
To select the MAC address of a WiFi client that is connected to the
access point:
1. Select the radio button to the left of the Match Classifications
menu.
2. From the menu, select a MAC address.
To enter a MAC address:
1. Select the radio button to the right of the Match Classifications
menu.
2. In the field to the right of the radio button, enter a MAC address.
Source IP In the Match Classifications field, enter the source IP address against
which the information in the IP header must be matched.
Destination IP In the Match Classifications field, enter the destination IP address
against which the information in the IP header must be matched.
Source Port The Match Classifications field is separated into two sections. In the
left section, enter the source port number, and optionally, in the right
section, enter the associated IP address against which the information
in the IP header must be matched.
Destination
Port
The Match Classifications field is separated into two sections. In the
left section, enter the destination port number, and optionally, in the
right section, enter the associated IP address against which the
information in the IP header must be matched.
Setting Description