Owners manual

Troubleshooting
134
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
5. Click the Start button to start capturing WiFi packets leaving or entering the access point on
the active operating channel.
Packets on the 2.4 GHz interface and 5 GHz interface are captured. Normal functioning
of the access point is not affected during the packet capture process.
If any previously captured packets exist, you are prompted to delete them, and only then
can you capture new packets.
6. Click the Stop button to stop capturing packets.
7. Click the Save as button to save the pacture.pcap file on your computer or to a disk drive.