Owners manual

Supplemental Information
140
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
Radio and WiFi settings
Operating mode Access point, infrastructure mode
WiFi access point name netgearxxxxxx, where xxxxxx are the last 6 digits
of the WiFi access point MAC address
Country and region Varies by region
WiFi communication 2.4 GHz radio enabled
5 GHz radio enabled
WiFi modes 11bg/ng/bgn
11a/a-na-ac
WiFi network names (SSIDs) NETGEAR_11ng
NETGEAR_11ac
Broadcast network names (SSIDs) Enabled
Radio frequency channels 11ng: Auto
11ac: Auto
MCS index/data rate (transmission speed) Best
Note: Maximum WiFi signal rate derived from
IEEE Standard 802.11 specifications. Actual
throughput will vary. Network conditions and
environmental factors, including volume of
network traffic, building materials and
construction, and network overhead, lower actual
data throughput rate.
Channel width 11ng: 20 MHz
11ac: Dynamic 20/40 MHz
Guard interval Auto
Output power Full
WiFi on/off (radio scheduling) Disabled
RTS threshold 2347
Fragmentation length 2346
Beacon interval 100
Aggregation length 65535
A-MPDU Enabled
RIFS transmission Disabled
DTIM interval 3
Table 5. Default configuration settings (continued)
Feature Description