Owners manual

Initial Setup
16
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
5. Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
6. Click the Login button.
The web browser displays the General page under the Configuration tab. If you are
using the access point as a standalone access point or as an access point with a wireless
controller, you must disable the cloud mode (see Disable the Cloud Mode for a
Standalone Access Point on page 17).
After you disable the cloud mode and you log in to the access point, the web browser
displays the Dashboard page under the Monitoring tab of the main menu. For more
information, see View Dashboard Information on page 73.
Log In to the Access Point When It Is Connected to a Network With a DHCP
Server
 To log in to the access point when it is connected to a network with a DHCP server.
1. Open a web browser from a computer that is connected to the same network as the
access point.
2. In the address bar, enter the network IP address of the access point.
You can find the IP address of the access point by accessing the DHCP server or by
using an IP address scanner utility. (Free IP address scanner utilities are available
online.)
3. Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Click the Login button.