Owners manual

Initial Setup

ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730

4. Select Configuration > Wireless > Basic > Wireless Settings.

5. Select the WiFi mode in the 5 GHz band:

• 11a. 802.11n-compliant devices can connect to the access point because they are

backward compatible.

• 11a-na-ac. This is the default setting. If you keep the default setting, go to Step 8.

When you change the WiFi mode, the Turn Radio On check box is automatically cleared,

and all fields, buttons, and menus on the page are masked out.

6. Turn on the radio by selecting the Turn Radio On check box.

A pop-up window opens.

Note: Under normal conditions, you want the radio to be turned on. Turning

off the radio disables access through the access point, which can be

helpful for configuration, network tuning, or troubleshooting activities.

7. Click the OK button to confirm the change of WiFi mode.

The change does not take effect until you click the Apply button after you complete the

WiFi configuration.