Owners manual

WiFi Configuration and Security
42
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
9. Specify the settings of the QoS Policy section as described in the following table.
Note: To be able to select a QoS policy, you must first configure one or more
policies (see Configure and Manage Quality of Service Policies on
page 106).
Setting Description
Network Authentication
and Data Encryption
Note: The data
encryption fields that
display on the page
depend on your selection
from the Network
Authentication menu.
Open System This is the default setting. An open system does not provide
any security or encryption.
WPA2 with
RADIUS
Configure the RADIUS server settings and select AES or
TKIP + AES encryption. For more information, see the
following sections:
• About WPA2 With RADIUS and WPA & WPA2 With
RADIUS on page 43
• Configure RADIUS Server Settings on page 45
Note: Select this setting only if all clients support WPA2.
WPA & WPA2 with
RADIUS
Configure the RADIUS server setting. TKIP + AES
encryption is the default encryption. For more information,
see the following sections:
• About WPA2 With RADIUS and WPA & WPA2 With
RADIUS on page 43
• Configure RADIUS Server Settings on page 45
Note: This setting allows clients to connect through either
WPA with TKIP or WPA2 with AES.
WPA2-PSK Enter a WPA passphrase and select AES or TKIP + AES
encryption.
For more information, see About WPA2-PSK and
WPA-PSK & WPA2-PSK on page 44.
Note: Select this setting only if all clients support WPA2.
WPA-PSK &
WPA2-PSK
Enter a WPA passphrase. TKIP + AES encryption is the
default encryption.
For more information, see About WPA2-PSK and
WPA-PSK & WPA2-PSK on page 44.
Note: This setting allows clients to connect through either
WPA with TKIP or WPA2 with AES.
VLAN ID Enter the VLAN ID to be associated with this security profile. The range for the
VLAN ID is 1–4094. The default VLAN ID is 1.
The VLAN ID must match the VLAN ID that is used by the other devices in your
network.