Owners manual

WiFi Configuration and Security
50
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
 To enable rogue AP detection:
1. Open a web browser from a computer that is connected to the same network as the
access point or to the access point directly through an Ethernet cable.
For more information, see Log In to the Access Point on page 15.
2. In the address bar, enter the IP address of the access point.
A login window opens.
3. Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Select Configuration > Security > Advanced > Rogue AP.
You can configure rogue AP detection for 802.11 bg/ng/bgn devices, 802.11 a/a-na-ac
devices, or both types of devices.
5. Select the Turn Rogue AP Detection On check box.
6. Select a detection policy from the Rogue AP Detection Policy menu:
• Mild. The AP scans for unknown APs every 180 seconds.
• Moderate. The AP scans for unknown APs every 60 seconds.
• Aggressive. The AP scans for unknown APs every 10 seconds.
Detected rogue APs are placed in the Unknown AP List.
7. To move APs from the Unknown AP List to the Known AP List, do the following:
a. Select individual check boxes for MAC addresses, or select all MAC addresses by
selecting the check box in the heading.