Owners manual

Management and Monitoring
84
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
Specify an Ensemble’s Channel Assignment Settings
Before you enable automatic channel assignment for an ensemble (see Manage Automatic
Channel Assignment for an Ensemble on page 85), you might want to specify a custom
channel interference limit, which triggers channel reassignment. You can also specify the
channel selection interval, which determines the schedule at which automatic channel
assignment occurs.
The defaults are as follows:
• Channel interference limit. 75 percent (the range is from 5 percent to 75 percent).
• Channel selection interval. 1 day (the range is from 30 minutes to 6 months).
 To manage an ensemble’s channel assignment settings:
1. Open a web browser from a computer that is connected to the same network as the
access point or to the access point directly through an Ethernet cable.
For more information, see Log In to the Access Point on page 15.
2. In the address bar, enter the IP address of the access point.
A login window opens.
3. Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Select Configuration > Ensemble > Advanced > Channel Assignment Settings.
5. From the Channel Interference Limit menu, select an interference limit percentage.
6. From the Channel Selection Interval menu, select a channel selection interval.
7. Click the Apply button.
Your settings are saved.