Owners manual

Management and Monitoring
88
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
The Member Selection table shows the members of the ensemble, including the firmware
versions of the members.
8. Click the Browse button.
A pop-up window opens.
9. Navigate to and select a firmware file to upload.
10. Click the Upgrade button.
An Alert pop-up window opens.
The firmware is uploaded to the master access point’s memory.
Note: The firmware is uploaded to but not upgraded on the master access point.
However, in Step 14 you can select the firmware to be upgraded on the
master access point.
11. In the Alert pop-up window, click the OK button.
The pop-up window closes. In the Upload Firmware section, a status bar shows the
progress of the upload process. After the upload process is complete, the master access
point restarts.
12. Log back in to the access point.
13. Select Maintenance > Ensemble Upgrade > Firmware Upgrade.
14. In the Member Selection table, select the check boxes for the members of the ensemble
that you want to upgrade, including, if you want, the master access point.
If you want to upgrade firmware on all members of the ensemble, select the check box in
the table heading.
15. Click the Apply button.
The firmware upgrade process starts.
The Firmware-transfer-status field in the table shows whether the firmware download to
and validation in the member is successful.