User manual

Advanced Configuration
108
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
Match Frame
Fields and Match
Classifications
(continued)
IP DCSP From the Match Classifications menu, select the DSCP marking
against which the information in the IP header must be matched:
• Best Effort
• Assured Forwarding - Class 1 Low
• Assured Forwarding - Class 1 Medium
• Assured Forwarding - Class 1 High
• Assured Forwarding - Class 2 Low
• Assured Forwarding - Class 2 Medium
• Assured Forwarding - Class 2 High
• Assured Forwarding - Class 3 Low
• Assured Forwarding - Class 3 Medium
• Assured Forwarding - Class 3 High
• Assured Forwarding - Class 4 Low
• Assured Forwarding - Class 4 Medium
• Assured Forwarding - Class 4 High
• Class Selector 1
• Class Selector 2
• Class Selector 3
• Class Selector 4
• Class Selector 5
• Class Selector 6
• Class Selector 7
• Expedited Forwarding
IP Protocol119 Traffic is matched against value 119 in the IP protocol field in the IP
header.
802.1P From the Match Classifications menu, select the CoS priority value
against which the information in the IP header must be matched:
• Routine(0)
• Priority(1)
• Immediate(2)
• Flash(3)
• Flash Override(4)
• Critic/CCP(5)
• Inter Control(6)
• Network Control(7)
IP Protocol In the Match Classifications field, enter the IP protocol value against
which the information in the IP header must be matched. A list of
protocol values is available at
http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xml.
Ether Type In the Match Classifications field, enter the Ether type value against
which the information in the IP header must be matched. A list of Ether
type values is available at
http://standards.ieee.org/develop/regauth/ethertype/eth.txt.
Setting Description