User manual

Initial Setup
32
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
Wall Installation
The best location for wall installation is at the center of your WiFi coverage area, and within
line of sight of all mobile devices. Make sure that the top (the dome side) of the access point
is directed toward the users and not the wall.
 To mount your access point to a wall:
1. Place the wall mounting bracket on the wall where you want to mount the access point.
2. Mark the wall where the two mounting holes are (see the figure in Step 5).
3. Attach the access point mounting bracket to the access point using the four mounting
screws as shown.
4. So you can see how the brackets fit together, attach the wall mounting bracket to the access
point mounting bracket as shown in the following figure. The three hooks on the wall
mounting bracket fit into the three holes on the access point mounting bracket. The handle
on the wall mounting bracket also fits into a hole on the access point bracket. Release the
wall mounting bracket by moving the handle.