Owners manual

Wireless Configuration and Security
38
ProSAFE Dual-Band Wireless AC Access Point WAC720 WAC730
for your wireless adapter and WPA or WPA2 client software for instructions about how
to configure WPA2 settings.
Setting Description
Network Authentication
and Data Encryption
Note: The data
encryption fields that
display onpage depend
on your selection from
the Network
Authentication menu.
Open System This is the default setting. Use an open system without any
encryption.
See Configure Legacy 802.1X on page 39.
Legacy 802.1X Configure the RADIUS server settings. Encryption is not
supported.
See Configure Legacy 802.1X on page 39.
WPA with RADIUS Configure the RADIUS server settings and select TKIP or
TKIP + AES encryption.
See Configure WPA With RADIUS and WPA & WPA2 With
RADIUS on page 40.
WPA2 with
RADIUS
Configure the RADIUS server settings and select AES or
TKIP + AES encryption.
See Configure WPA With RADIUS and WPA & WPA2 With
RADIUS on page 40.
Note: Select this setting only if all clients support WPA2.
WPA & WPA2 with
RADIUS
Configure the RADIUS server setting. TKIP + AES
encryption is the default encryption.
See Configure WPA With RADIUS and WPA & WPA2 With
RADIUS on page 40.
Note: This setting allows clients to connect through either
WPA with TKIP or WPA2 with AES.
WPA-PSK Enter a WPA passphrase and select TKIP or TKIP + AES
encryption.
See Configure WPA-PSK, WPA2-PSK, and WPA-PSK &
WPA2-PSK on page 40.
WPA2-PSK Enter a WPA passphrase and select AES or TKIP + AES
encryption.
See Configure WPA-PSK, WPA2-PSK, and WPA-PSK &
WPA2-PSK on page 40.
Note: Select this setting only if all clients support WPA2.
WPA-PSK &
WPA2-PSK
Enter a WPA passphrase. TKIP + AES encryption is the
default encryption.
See Configure WPA-PSK, WPA2-PSK, and WPA-PSK &
WPA2-PSK on page 40.
Note: This setting allows clients to connect through either
WPA with TKIP or WPA2 with AES.