Owners manual

Management and Monitoring
50
ProSAFE Dual-Band Wireless AC Access Point WAC720 WAC730
Enable Remote Management
Both Simple Network Management Protocol (SNMP) and the remote console Secure Shell
(SSH) are enabled by default, which allows for remote management of the wireless access
point from a client running SNMP management software, as well as from an SSH client. The
Telnet console is disabled by default.
• SNMP Management
• Secure Shell and Telnet Management
SNMP Management
 To set up an SNMP management interface:
1. Select Maintenance > Remote Management > SNMP.
2. Specify the settings as explained in the following table:
Setting Description
SNMP Select the Enable radio button to allow the SNMP network management
software, such as HP OpenV
iew, to manage the wireless access point
through SNMPv1/v2 protocol. By default, the Disable radio button is
selected.
Read-Only Community Name Enter the community string to allow the SNMP manager to read the
wireless access point’
s Management Information Base (MIB) objects. The
default is public.
Read-Write Community Name Enter the community string to allow the SNMP manager to read and write
the wireless access point’
s MIB objects. The default is private.
Trap Community Name Enter the community string to allow the SNMP manager to send traps. The
default is trap.
IP Address to Receive Traps Enter the IP address of the SNMP manager to receive traps sent from the
wireless access point.
Trap Port Enter the number of the SNMP manager port to receive traps sent from the
wireless access point.
The default is 162.
3. Click the Apply button.