Owners manual

Management and Monitoring
67
ProSAFE Dual-Band Wireless AC Access Point WAC720 WAC730
The following table explains the fields of the Statistics page:
Setting Description
Wired Ethernet
Packets The number of packets received and transmitted over the Ethernet connection
since the wireless access point was restarted.
Bytes The number of bytes received and transmitted over the Ethernet connection
since the wireless access point was restarted.
Wireless 802.11bgn
and
Wireless 802.11a-na-ac
Note: The section heading depends on the configured wireless mode.
Unicast Packets The number of unicast packets received and transmitted over the wireless
connection since the wireless access point was restarted.
Broadcast Packets The number of broadcast packets received and transmitted over the wireless
connection since the wireless access point was restarted.
Multicast Packets The number of multicast packets received and transmitted over the wireless
connection since the wireless access point was restarted.
Total Packets The total number of packets received and transmitted over the wireless
connection since the wireless access point was restarted.
Total Bytes The total number of bytes received and transmitted over the wireless connection
since the wireless access point was restarted.
Client Association
802.11bgn Radio,
802.11a-na-ac Radio
Enable and Configure Ensemble Mode
An AP ensemble is a dynamic, configuration-aware group of APs in the same subnet of a
network. Each ensemble can include up to 16 members, up to 10 APs of the same model.
Only one ensemble per wireless network is supported. However, a network subnet can
include multiple ensembles. Ensembles allow APs to share various configuration information,
such as VAP settings and QoS queue parameters.
Ensemble members share the configuration of the dominant AP.
An ensemble can be formed between two APs if the following conditions are met:
• The
APs use the same radio mode.
• The
APs are connected on the same bridged segment.
• The
APs joining the ensemble have the same ensemble name.
• Ensemble mode is enabled on both
APs.
The number of associated clients connected to the radio in the configured
wireless modes.