Owners manual

Advanced Configuration
84
ProSAFE Dual-Band Wireless AC Access Point WAC720 WAC730
Match Frame
Fields and Match
Classifications
(continued)
802.1P From the Match Classifications menu, select the CoS priority value
against which the information in the IP header needs to be matched:
• Routine(0)
• Priority(1)
• Immediate(2)
• Flash(3)
• Flash Override(4)
• Critic/CCP(5)
• Inter Control(6)
• Network Control(7)
IP Protocol In the Match Classifications field, enter the IP protocol value against
which the information in the IP header needs to be matched. A list of
protocol values is available at
http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xml.
Ether Type In the Match Classifications field, enter the Ether type value against
which the information in the IP header needs to be matched. A list of
Ether type values is available at
http://standards.ieee.org/develop/regauth/ethertype/eth.txt.
Source MAC In the Match Classifications field, select or enter the source MAC
address against which the information in the IP header needs to be
matched.
To select the MAC address of a wireless client that is connected to the
wireless access point:
1. Select the radio button to the left of the Match Classifications
menu.
2. From the menu, select a MAC address.
To enter a MAC address:
1. Select the radio button to the right of the Match Classifications
menu.
2. In the field to the right of the radio button, enter a MAC address.
Destination
MAC
In the Match Classifications field, select or enter the destination MAC
address against which the information in the IP header needs to be
matched.
To select the MAC address of a wireless client that is connected to the
wireless access point:
1. Select the radio button to the left of the Match Classifications
menu.
2. From the menu, select a MAC address.
To enter a MAC address:
1. Select the radio button to the right of the Match Classifications
menu.
2. In the field to the right of the radio button, enter a MAC address.
Setting Description