User Manual

If your browser does not display the login window but displays a security warning,
dismiss the warning. For more information, see Dismiss
a browser security warning
on page 41.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect
over
WiFi using the NETGEAR Insight app on page 21.
The Dashboard page displays.
4.
Select Management > Configuration > System > Advanced > User Accounts.
The existing user accounts display.
5.
To the right of the user account, change the existing settings as needed:
•
User Name: Enter another user name.
•
Password: Enter another password between 8 and 64 characters in length. The
password must contain at least one uppercase letter, one lowercase letter, and
one number. The following special characters are allowed:
! @ # $ % ^ & * ( )
•
Privilege: From the menu, select Read-Write or Read-Only.
6. Click the Apply button.
Your settings are saved.
Remove a user account
You can remove a user account that you no longer need. You cannot remove the default
admin user account.
To remove a user account:
1.
Launch a web browser from a computer that is connected to the same network as
the access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window displays.
User Manual105Manage Access and Security
Insight Cloud Managed WiFi 6 AX3600 Access Point Model WAX620