User Manual

3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect
over
WiFi using the NETGEAR Insight app on page 21.
The Dashboard page displays.
4.
Select Management > Configuration > Wireless > Basic.
The page that displays lets you select an SSID.
5.
Click the > button to the left of the SSID.
The settings for the selected SSID display.
6.
Under Schedule, select one of the following radio buttons:
•
Always ON: The WiFi network is enabled.
•
Always OFF: The WiFi network is disabled.
•
Custom: The WiFi network is enabled or disabled according to a schedule that
you must set up.
An icon displays to the right of the radio button.
7.
If you selected Custom in the previous step, do the following:
a. Click the icon next to the radio button.
A pop-up window displays.
b.
Either select a predefined time from the Preset menu or select custom time
blocks by clicking the time blocks.
A blue color for a time block indicates that the WiFi network will be enabled (on).
A gray color for a time block indicates that the WiFi network will be disabled (off).
c. Click the Done button.
The pop-up window closes.
8. Click the Apply button.
Your settings are saved.
User Manual70Manage the Basic WiFi Features
for a WiFi network
Insight Cloud Managed WiFi 6 AX3600 Access Point Model WAX620