User Guide

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
4-30 RF Plan
v1.0, June 2007
The algorithm stops when the movement is less than a threshold value calculated based on the
number of APs. The threshold value is displayed in the status bar at the bottom of the browser
window.
The result should look similar to Figure 4-29.
3. Click Save, then click AM Planning.
Running the AM Plan
Running the AM Plan algorithm is similar to running the AP Plan.
1. Click Initialize then Start.
The algorithm stops when the movement is less than a threshold value calculated based on the
number of AMs. The threshold value is displayed in the status bar at the bottom of the browser
window.
Note: To see the approximate coverage areas of each of the APs, select an AP type
from the Approx. Coverage pull-down box and select a rate from the Coverage
Rate pull-down box.
Figure 4-29