User's Manual
Table Of Contents
- Reference Manual for the 54 Mbps Wireless Travel Router WGR101
- Contents
- Chapter 1 About This Manual
- Chapter 2 Introduction
- Chapter 3 Connecting the Router to the Internet
- Chapter 4 Wireless Configuration
- Chapter 5 Management
- Chapter 6 Network Configuration
- Chapter 7 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Network, Routing, Firewall, and Basics
- Appendix C Preparing Your Network
- Appendix D Wireless Networking Basics
- Glossary
- Index
Reference Manual for the 54 Mbps Wireless Travel Router WGR101
3-8 Connecting the Router to the Internet
May 2004 (202-10034-01)
Basic Wireless Security WEP Configuration
The procedure provides instructions for basic wireless security configuration for single or multiple
users. For full instructions on setting the wireless settings, see “Wireless Configuration” on
page 4-1.
1. LOG IN TO THE WGR101 WIRELESS TRAVEL ROUTER (SEE PAGE 3-5)
The WGR101 wireless travel router and display the wireless settings page as shown in below.
Figure 3-8: Login result: WGR101 home page
Note: If you did not connect to the router, verify that your computer is set up for DHCP. For
help with this, please see the animated tutorials on the CD or Appendix C, “Preparing Your
Network.
2. CUSTOMIZE THE WEP WIRELESS SECURITY SETTINGS
a. The Wireless Settings page shows NETGEAR-TRAVEL as the Name (SSID).
b. In the Region field, choose the country where you are located.