RangeMax NEXT Wireless-N Access Point WN802T Reference Manual NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 202-10204-03 v1.
© 2007 by NETGEAR, Inc. All rights reserved.. Trademarks NETGEAR, the NETGEAR logo, RangeMax and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. Other brand and product names are registered trademarks or trademarks of their respective holders. Portions of this document are copyright Intoto, Inc.
Español [Spanish] Por medio de la presente NETGEAR Inc. declara que el Radiolan cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ NETGEAR Inc. ΔΗΛΩΝΕΙ ΟΤΙ Radiolan ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ. Français [French] Par la présente NETGEAR Inc.
FCC Requirements for Operation in the United States FCC Information to User This product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifications will invalidate all applicable regulatory certifications and approvals FCC Guidelines for Human Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Certificate of the Manufacturer/Importer It is hereby certified that the RangeMax NEXT Wireless-N Access Point has been suppressed in accordance with the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example, test transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please refer to the notes in the operating instructions.
vi v1.
Contents About This Manual Conventions, Formats and Scope .................................................................................... ix How to Use This Manual ................................................................................................... x How to Print this Manual .................................................................................................... x Revision History ...............................................................................................
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Chapter 3 Wireless Security Settings Understanding WN802T Wireless Security Options .......................................................3-1 WEP/WPA Settings ..................................................................................................3-2 SSID and WEP/WPA Settings Setup Form ..............................................................3-4 Configuring WEP .....................................................................
About This Manual The NETGEAR® RangeMax™ NEXT Wireless-N Access Point WN802T Reference Manual describes how to install, configure and troubleshoot the RangeMax NEXT Wireless-N Access Point. The information in this manual is intended for readers with intermediate computer and Internet skills. Conventions, Formats and Scope The conventions, formats, and scope of this manual are described in the following paragraphs: • • Typographical Conventions.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Danger: This is a safety warning. Failure to take heed of this notice may result in personal injury or death. • Scope. This manual is written for the RangeMax NEXT according to these specifications: Product Version RangeMax NEXT Wireless-N Access Point Manual Publication Date August 2007 For more information about network, Internet, firewall, and VPN technologies, see the links to the NETGEAR website in Appendix B, “Related Documents”.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual • Printing a Chapter. Use the PDF of This Chapter link at the top left of any page. – Click the PDF of This Chapter link at the top right of any page in the chapter you want to print. The PDF version of the chapter you were viewing opens in a browser window. – Your computer must have the free Adobe Acrobat reader installed in order to view and print PDF files. The Acrobat reader is available on the Adobe Web site at http://www.adobe.com.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual xii About This Manual v1.
Chapter 1 Introduction This chapter describes some of the key features of the NETGEAR RangeMax NEXT Wireless-N Access Point. It also includes the minimum prerequisites for installation (“System Requirements” on page 1-2.), package contents (“What’s in the Box” on page 1-3) and a description of the front and back panels of the WN802T (“Front Panel of the RangeMax NEXT” on page 1-3).
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual • Delivers stable, application enhancing connections using Steady-Stream technology. • Wi-Fi Protected Access 2 (WPA2) encryption and authentication • • • • • RADIUS authentication support Easy, Web-based setup for installation and management. NetBIOS login capability. Front panel LEDs for easy monitoring of status and activity. Flash memory for firmware upgrades.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual What’s in the Box The product package should contain the following items: • RangeMax NEXT Wireless-N Access Point. • 12V, 1.5A Switching Power Supply • Vertical stand • Category 5 (CAT5) Ethernet cable. • Resource CD • NETGEAR RangeMax™ NEXT Wireless-N Access Point WN802T Installation Guide • Wall mount kit. • Warranty and Support Information Card. If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 1-1 You can use the status lights on the front of the wireless access point to verify various conditions described in the following table . Table 1-1. Status Light Descriptions Label Activity Description Power On -- Green Solid Off Solid Amber Blinking Amber Power is supplied the and the WN802T has passed its diagnostic test. Power is not supplied to the router. System is being initialized. Firmware upgrade is in progress.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Back Panel of the RangeMax NEXT The back of the WN802T contains the items listed below: 1 – Reset Button 2 – Ethernet Port 3 – Power Figure 1-2 Viewed from top to bottom: 1. The reset button which can be used to reset the WN802T or restore the factory default settings. See Appendix A, “Default Settings and Technical Specifications” for more information on restoring the factory default settings. 2.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 1-3 Wall Mount Kit A Wall Mount kit that allows you to conveniently and securely mount your WN802T to a wall is included with your wireless access point. The kit includes a top and bottom bracket. Four screws are required to install the brackets and are not supplied with the kit. For instructions to install the the wall mount kit, see “Installing the Wall Mount Kit (Optional)” on page 2-10. 1-6 Introduction v1.
Chapter 2 Installation and Configuration This chapter describes how to set up your RangeMax NEXT Wireless-N Access Point for wireless connectivity to your LAN. This basic configuration will enable computers with 802.11b/g/Next or 802.11b/g wireless adapters to connect to the Internet, or access printers and files on your LAN. Note: Indoors, computers can connect over 802.11b/g/Next or 802.11b/g wireless networks at ranges of several hundred feet or more.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Note: Failure to follow these guidelines can result in significant performance degradation or inability to wirelessly connect to the WN802T. For complete performance specifications, see Appendix A, “Default Settings and Technical Specifications”. For best results, place your wireless access point: • Near the center of the area in which your PCs will operate.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Configuring the RangeMax NEXT Before installing the RangeMax NEXT Wireless-N Access Point, you should make sure that your Ethernet network is up and working. You will be connecting the access point to the Ethernet network so that computers with 802.11Next/b/g or 802.11b/g wireless adapters will be able to communicate with computers on the Ethernet network.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 2-1 3. Click OK. The main menu of the WN802T will display as shown in Figure 2-2. • When the wireless access point is connected to the Internet, you can select the Documentation link under the Web Support menu to view the documentation for the wireless access point. • When connected to the Internet, you can also select KnowledgeBase to access Application Notes relevant to wireless networking.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 2-2 To configure the Basic LAN settings: 1. Select Basic Settings under Setup on left side of the main menu. The Basic Settings screen will display. The default settings should be suitable for most users and environments. Installation and Configuration 2-5 v1.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 2-3 2. Enter the Access Point Name of the WN802T. This unique name is the access point NetBIOS name. The Access Point Name is printed on the rear label of the WN802T. The default is netgearxxxxxx, where xxxxxxx represents the last 6 digits of the WN802T MAC address. You may modify the default name with a unique name up to 15 characters long. 3. Enter the IP Address fields of the WN802T. – DHCP Client.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual – Default Gateway. Enter the IP address of the gateway for your LAN. For more complex networks, enter the address of the router for the network segment to which the wireless access point is connected. The default is 0.0.0.0. – Primary DNS Servers. The WN802T will use this IP address as the primary Domain Name Server used by stations on your LAN. The default is 0.0.0.0. – Secondary DNS Servers.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual . Figure 2-4 2. From the Country/Region pull-down menu, select the region where the WN802T can be used (the Country/Region is not Configurable in the United States; but is configurable in the rest of the world). Note: If your country or region is not listed, please check with your local government agency. 3. Configure the Wireless LAN settings based on the following field descriptions: • Turn Radio On.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual – 11b/g/Next – 802.11b, 802.11g and 802.11n wireless stations can be used. The default is 11b/g/Next • Channel/Frequency. From the pull-down menu, select the channel you wish to use on your wireless LAN. The wireless channels to use in the U.S. and Canada are 1 to 11; for Europe and Australia, 1 to 13. The default is channel 6.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Deploying the RangeMax NEXT Now that you have completed the setup steps, you can deploy the WN802T in your network. If needed, you can now reconfigure the computer you used in step 1 in “Configuring the RangeMax NEXT” on page 2-3 back to its original TCP/IP settings. To deploy the RangeMax NEXT: 1. Disconnect the WN802T and position it where it will be deployed.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Step 1 Step 2 Step 3 Figure 2-5 Configuring and Testing Your PCs for Wireless Connectivity Program the wireless adapter of your PCs to have the same SSID and channel that you configured in Wireless Settings for the WN802T. Check that they have a wireless link and are able to obtain an IP address by DHCP from the WN802T.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Logging in to the RangeMax NEXT The WN802T is set, by default with the IP address of 192.168.0.233 with DHCP disabled. Note: If logging in using the default IP address, the computer you are using to connect to the WN802T should be configured with an IP address that starts with 192.168.0.x and a Subnet Mask of 255.255.255.0.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual 3. The login screen will display. Enter admin for the user name and password for the password, both in lower case letters. Figure 2-7 4. Click OK. Your Web browser should automatically find the RangeMax NEXT and display the home screen, as shown in Figure 2-7 above. Installation and Configuration 2-13 v1.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual 2-14 Installation and Configuration v1.
Chapter 3 Wireless Security Settings Your wireless data transmissions can be received well beyond your walls by anyone with a compatible adapter. For this reason, use the security features of your wireless equipment. The RangeMax NEXT provides highly effective security features which are covered in detail in this chapter. Deploy the security features appropriate to your needs. WN802T :LUHOHVV 'DWD 6HFXULW\ 2SWLRQV 5DQJH 8S WR )RRW 5DGLXV .
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual • Use WPA-PSK or WPA2-PSK. Wi-Fi Protected Access (WPA) provides stronger data encryption than WEP. The very strong authentication along with dynamic per frame rekeying of WPA make it virtually impossible to compromise. The preshared key (PSK) is common to all users. Because this is a recent standard, wireless device driver and software availability may be limited. • Use WPA-PSK or WPA2-PSK with Radius.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual • Data Encryption. The available options depend on the Network Authentication setting selected (see Table 3-1 above); otherwise, the default is None. The Data Encryption settings are explained in the table below: Table 3-1. Data Encryption Settings Data Encryption Type Description None No encryption is used. 64 bits WEP Standard WEP encryption, using 40/64 bit encryption.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual SSID and WEP/WPA Settings Setup Form For a new wireless network, print or copy this form and fill in the configuration parameters. For an existing wireless network, the person who set up or is responsible for the network will be able to provide this information. Be sure to set the Regulatory Domain correctly as the first step. • SSID: The Service Set Identification (SSID) identifies the wireless local area network.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Configuring WEP To configure WEP data encryption: 1. Select WEP/WPA Settings under the Security menu on the left navigation pane. The WEP/ WPA Settings screen will display. Figure 3-2 2. Check the WEP radio button. The WEP Security Encryption options will display. Select the Authentication Type from the pull-down menu. The default is Automatic. 3. Selection the Encryption Strength from the pull-down menu; either 64-bit or 128 bit. 4.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 3-3 5. Select the key to be used as the default key by checking the radio box. (Data transmissions are always encrypted using the default key.) See the document “Wireless Communications” for a full explanation of each of these options, as defined by the IEEE 802.11 wireless communication standard. A link to this document on the NETGEAR website is in Appendix B, “Related Documents.” 6. Click Apply to save your settings.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Configuring WPA-PSK, WPA2-PSK and WPA-PSK + WPA2PSK Not all wireless adapters support WPA. Furthermore, client software is required on the client. Windows XP and Windows 2000 with Service Pack 3 or above include the client software that supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 3-5 3. Enter the preshared key Passphrase (Network Key). 4. Click Apply to save your settings. Configuring WPA with Radius, WPA2 with Radius, and WPA + WPA2 with Radius In an organization with many wireless users, using a single preshared key may not be a practical security method. Deploying a RADIUS server will allow you to manage user authentication individually and centrally.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 3-6 2. Select one of the following radio buttons: WPA with Radius, WPA2 with Radius, or WPA + WPA2 with Radius. Your selection will display. Figure 3-7 3. Click Apply to save your settings. A message appears informing you that you must configure the Radius Server Settings menu. 4. Click OK. 5. Configure the Radius Server Settings menu using the procedure described in “Configuring the RADIUS Server Settings” on page 4-9.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Restricting Wireless Access by MAC Address By default, all wireless PCs that are configured with the correct SSID are allowed access to your wireless network. For increased security, you can restrict access to your wireless network to only those trusted wireless PCs based on their MAC address.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual 5. The Trusted Wireless Stations table will display any wireless stations you have entered. If you have not entered any wireless stations this list will be empty. Note: If Turn Access Control On is enabled and the Access Control List is blank, then no wireless PCs will be able to connect to your wireless network To delete an existing entry: Check the radio button adjacent to the entry and then click Delete.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual 3. Repeat these steps for each additional device you want to add to the Trusted Wireless Stations list. Note: The wireless stations must be selected and added one at a time to the Trusted Wireless Stations list. 4. Click Apply to save your wireless access control list settings. Now, only devices on this list will be allowed to wirelessly connect to the WN802T. 3-12 Wireless Security Settings v1.
Chapter 4 Management This chapter describes how to use the management and information features as well as the advanced wireless settings features of your RangeMax NEXT Wireless-N Access Point. These features can be found under the Management, Information and Advanced menus on the left navigation pane of the browser interface. Changing the Password Note: Before changing the WN802T password, use the backup utility to save your configuration settings.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual 2. First enter the old password, in the Old Password field. 3. Then enter the new password twice in the New Password and Repeat New Password fields. 4. Click Apply to save your changes. Note: Be sure to write down the new password and store it in a safe place. To restore the default password: 1. Check the Restore Default Password radio button. 2. Click Apply. The default password will be restored.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 4-3 4. Click Browse and go to the location of the downloaded software upgrade file. 5. Click Upload. Warning: When uploading firmware to the wireless access point, it is important not to interrupt the Web browser by closing the window, clicking a link, or loading a new page. If the browser is interrupted, the upload may fail, corrupt the software, and render the WN802T inoperable.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 4-4 2. Select the task you want to perform: • • To create a backup file of the current settings, click Backup under the Save a Copy of Current Settings heading. – If you don’t have your browser set up to save downloaded files automatically, locate where you want to save the file, rename it if you like, and click Backup.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual – A list of the factory default settings can be found in Appendix A, “Default Settings and Technical Specifications”. Warning: Do not try to go online, turn off the Access Point, shut down the computer or do anything else to the Access Point until it finishes restarting. When the Test light turns off, wait a few more seconds before doing anything with the Access Point.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual 2. Click Refresh to update the list and force the wireless access point to look for associated devices. Figure 4-6 • For each device, the table shows the Station ID, MAC address, IP Address, and Status (whether the device is allowed to communicate with the wireless access point or not). • If the wireless access point is rebooted, the table data is lost until the wireless access point rediscovers the devices.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 4-7 • The Wired Ethernet section of the table displays traffic statistics for the wired Ethernet interface. • The Wireless section displays traffic statistics for the wireless interface. 2. Click Refresh to update the current statistics.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual – With the CSMA/CA transmission mechanism, the transmitting station sends out an RTS packet to the receiving station, and waits for the receiving station to send back a CTS (Clear to Send) packet before sending the actual packet data. The default value is 2346. • Fragmentation Length. This is the maximum packet size used for fragmentation. Packets larger than the size programmed in this field will be fragmented.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 4-8 2. Make the changes to the Wireless LAN Settings based on the field descriptions outlined above. 3. Click Apply for your changes to take effect. Configuring the RADIUS Server Settings RADIUS (Remote Authentication Dial In User Service) is a protocol for managing Authentication, Authorization and Accounting (AAA) of multiple users in a network.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Configure the RADIUS Server Settings menu with the parameters described in Table 4-1: Table 4-1. RADIUS Server Settings Fields Field Description Primary and Secondary Authentication Servers The Authentication RADIUS Server provides authentication and access control. The primary server is mandatory. A secondary server, which will be used if the primary server fails, is optional. IP Address The IP address of the authentication server.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Figure 4-9 2. Make the changes to the RADIUS Server Settings based on the field descriptions outlined above. 3. Click Apply for your changes to take effect. Management 4-11 v1.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual 4-12 Management v1.
Chapter 5 Advanced Wireless Bridging This chapter describes how to configure the advanced features of your WN802T to one of six Access Point Modes or in Wireless Bridge and Repeater Mode.These features can be found under the Advanced heading in the main menu on the Wireless Settings Wireless Bridging screens. The RangeMax NEXT Wireless-N Access Point lets you build large wireless networks. Examples of wireless bridging configurations are: • Access Point. Standard Access Point mode (default mode).
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual . Figure 5-1 2. Under Advanced on the main menu, click Wireless Bridging. The Advanced Wireless Bridging screen will display showing the default settings for the wireless access point. 3. Select the Wireless Multi-Point Bridging radio button to enable multi-point bridging. 4. Enter the MAC address of the first wireless access point and click Add. The AP’s MAC address and connection information will appear in the Wireless Accept Point List.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual The following figure illustrates a multi-point bridge setup over three LAN segments. AP2 AP3 Point-to-Point Bridge Mode Wireless PC Card in a Notebook Computer Point-to-Point Bridge Mode AP1 Router 192.168.0.1 LAN Segment 1 Hub or Switch Multi-Point Bridge Mode Internet PCs Hub or Switch LAN Segment 2 LAN PCs Segment 3 PCs Figure 5-2 To configure wireless access points in a multi-point configuration: 1.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual • If using DHCP, all wireless access points should be set to “Obtain an IP address automatically (DHCP Client)” in the IP Address Source portion of the Basic IP Settings menu. • That all wireless access points are using the same SSID, Channel, WEP authentication mode, if any, and encryption (WPA is not available in bridge modes). • That each Point-to-Point AP has the Multi-Point AP MAC address in its Remote AP MAC address table.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual To configure the WN802T in wireless repeater mode: 1. Open a web browser and log into the WN802T using the addressing scheme you have set up. Figure 5-3 2. Under Advanced on the main menu, click Wireless Bridging. The Wireless Bridging screen will display showing the default settings for the wireless access point. 3. Select the Repeater with Wireless Client Association radio button to enable Repeater Mode. 4.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual The following drawing illustrates two wireless access points daisy-chained together in wireless repeater mode AP1 Wireless PC Associated with AP1 AP2 AP in Repeater Mode with Client associations Router AP in Repeater Mode with Client associations Internet 192.168.0.1 LAN Segment 1 Wireless PC Associated with AP2 PCs Figure 5-4 To configure a LAN segment utilizing the WN802T in Repeater Mode: 1.
Chapter 6 Troubleshooting This chapter provides information for troubleshooting issues with your RangeMax NEXT Wireless-N Access Point. Following each problem description, instructions are provided to assist you in diagnosing and solving the problem. Following are some tips for correcting simple problems that could occur. No lights are lit on the access point. The access point has no power.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual • If the Wireless LAN activity light stays off, disconnect the adapter from its power source and then plug it in again. • Contact NETGEAR if the WLAN light remains off. I cannot configure the access point from a browser. Check these items: • The WN802T is properly installed, LAN connections are OK, and it is powered on. Check that the LAN port LED is blinking green to verify that the Ethernet connection is OK.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual • The computer with the wireless adapter may not have the correct TCP/IP settings to communicate with the network. Restart the computer and check that TCP/IP is set up properly for that network. The usual setting for Windows on the Network Properties is set to “Obtain an IP address automatically.” • The wireless access point’s default values may not work with your network.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual • Reset to Factory Defaults: This button can also be used to clear ALL data and restore ALL settings to the factory default values. These settings are shown in Appendix A, “Default Settings and Technical Specifications”. To clear all data and restore the factory default values: 1. Power off the WN802T and power it back on. 2.
Appendix A Default Settings and Technical Specifications This appendix provides the factory default settings and technical specifications for the RangeMax NEXT Wireless-N Access Point. Factory Default Settings You can use the reset button located on the front of your device to reset all settings to their factory defaults. This is called a hard reset. • To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the Power LED changes from blinking green to solid amber).
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Table A-1. Access Point Default Configuration Settings Feature Description Lan IP 192.168.0.233 Subnet Mask 255.255.255.0 Gateway Address 192.168.0.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Technical Specifications Table A-2. WN802T Technical Specifications Parameter RangeMax NEXT Wireless-N Access Point 802.11Next Data Rates 7.2, 14.4, 21.7, 28.9,43.3, 57.8, 65, 72.2, 87.7, 115.6, 130 & 144.4 Mbps (20Hz) 15, 30, 45, 60, 90, 120. 135. 150, 180, 240, 270 & 300 Mbps (40Hz) 802.11b/g Data Rates 1, 2, 5.5, 11, 12, 18, 24, 36, 38, 54, & 108 Mbps (Auto-rate capable) 802.11b/g/Next Operating Frequencies 2.412 ~ 2.462 GHz (US) 2.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual A-4 Default Settings and Technical Specifications v1.
Appendix B Related Documents This appendix provides links to reference documents you can use to gain a more complete understanding of the technologies used in your NETGEAR product. Document Link Internet Networking and TCP/IP Addressing http://documentation.netgear.com/reference/enu/tcpip/index.htm Wireless Communications http://documentation.netgear.com/reference/enu/wireless/index.htm Preparing a Computer for Network Access http://documentation.netgear.com/reference/enu/wsdhcp/index.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual B-2 Related Documents v1.
Index Numerics B 11b/g/Next 4-8 default mode 2-9 Backup/Restore Settings 4-3 11n 4-8 brackets installing 2-10 wall mount 2-10 Basic Settings menu 2-5 11Next 4-8 128-bit data encryption 3-5 Broadcast SSID 2-8 192.168.0.210 static IP, default 6-2 Broadcast Wireless Network Name 2-8 192.168.0.210, Static IP Address 2-3 192.168.0.230, default address 2-3 C 192.168.0.233 LAN IP, default 6-2 Change Password 4-1 Channel/Frequency 2-9 255.255.255.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual default SSID 2-8 default subnet mask 255.255.255.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual P package contents 1-3 Passphrase use with WEP 3-3 used with WPA2-PSK 3-3 used with WPA-PSK 3-3 used with WPA-PSK=WPA2-PSK 3-3 passphrase use with WEP 3-5 password changing default 4-1 default 2-9, 2-13, 3-10 performance degradation causes of 2-2 Primary DNS Servers default 2-7 Repeater with Wireless Client Association 5-1, 5-4, 5-5 configuration of 5-5 example 5-6 Reserve IP configuring 6-2 Reserve IP Address 2-12 Reset Button reboot 6-3 resto
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Wireless 4-7 Wireless Card Access Setup 3-11 system requirements 2-2 wireless configuring 802.11b/g modes 2-3, 2-7 802.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual TKIP 3-7 WPA-PSK + WPA2-PSK 3-7 Index-5 v1.
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Index-6 v1.
