Use and Care Manual

Table Of Contents

B. Command Line Reference

The ProSafe Wireless-N Access Point WNAP210 (AP) can be configured through either the

command-line interface (CLI), a web browser, or a MIB browser. The CLI allows viewing and

modification of the configuration from a terminal or computer through a Telnet connection.

Command Sets

keyword Description

-------------------------------------- ----------------------

|-backup-configuration --backup configuration

|-config> --configuration setting

| |-apname --access point name

| |-country --country/region

| |

| |-http-redirect --enable HTTP redirection

| |-http-redirect-url --HTTP redirection URL

| |-interface> --select wireless lan interface

| | |-wlan> --wireless LAN interface setting

| | | |-2.4GHz> --2.4 GHz wireless LAN interface setting

| | | | |-aggregation-length --aggregated packet size

| | | | |-ampdu --aggregated MAC Protocol Data Unit

| | | | |-beacon-interval --wireless beacon period in TU(1024 us)

| | | | |-channel --wireless channel (depends on country

and wireless mode)

| | | | |-dtim-interval --wireless DTIM period in beacon interval

| | | | |-extension-protection-spacing --wireless extension protection spacing

| | | | |-fragmentation-length --wireless fragmentation threshold(even

only)

| | | | |-guardinterval --interval (from interference from other

transmissions)