Operation Manual

Hardware Setup
15
CENTRIA WNDR4700/WNDR4720
If the computer is set to a static or fixed IP address (this is uncommon), change it to
obtain an IP address automatically from the router. Consult the documentation that came
with your computer or operating system for instructions about how to do this.
If the router does not connect to the Internet:
1. Review your settings to be sure that you have selected the correct options and typed
everything correctly
.
2. Contact your ISP to verify that you have the correct configuration information.
3. Read Chapter 11, Troubleshooting. If problems persist, register your NETGEAR product and
contact NETGEAR technical support.
Install an Optional Internal Hard Disk Drive (HDD)
CENTRIA supports an optional HDD. The router supports 3.5-inch SATA HDDs (both 0.75
and 1-inch thickness). Visit www.netgear.com/CENTRIA_HD for list of compatible hard
drives.
CAUTION:
To protect your equipment, always turn off the router before removing or
inserting an HDD.
To install a hard disk drive:
1. Make sure the router is powered of
f.
2. Open the router side door (a) and move the internal latch down (b) as shown (c).
b
a
c
This allows you to insert the HDD.