Specifications

Administration
67
N600 Wireless Dual Band Gigabit Router WNDRMAC
Wireless Settings (2.4 GHz) and Wireless Settings (5 GHz)
You need to scroll down to see all the fields for this section of the Router Status screen:
The following settings are displayed for each network:
Name (SSID). The wireless ne
twork name (SSID) used by the router. The default names for
the 5 GHz ends in -5G to distinguish it from the 2.4 GHz network.
Region. The
geographic region where the router is being used. It might be illegal to use the
wireless features of the router in some parts of the world.
Channel. Id
entifies the operating channel of the wireless port being used. The default
channel is Auto. When Auto is selected, the router will find the best operating channel
available. If you notice interference from nearby devices, you can select a different channel.
Channels 1, 6, and 11 will not interfere with each other.
Mode. In
dicates the wireless communication mode: Up to 54Mbps, Up to 130Mbps (default),
and Up to 300Mbps.
Wireless AP. Indicate
s whether the radio feature of the router is enabled. If this feature is not
enabled, the Wireless LED on the front panel is off.
Broadcast Name. Indicates whethe
r the router is broadcasting its SSID.
Wi-Fi Protected Setup. Indicates whethe
r Wi-Fi Protected Setup is configured for this
network.
Guest Network (2.4 GHz) and Guest Network (5 GHz)
To need to scroll down in order to view this portion of the Router Status screen.