Specifications

Advanced Settings
90
N600 Wireless Dual Band Gigabit Router WNDRMAC
To set up a static route:
1. Select Advance
d > Advanced Setup > Static Routes to display the following screen:
2. In the Route Name field, type a name for this static route (for identification purposes only.)
3. Select the Priva
te check box if you want to limit access to the LAN only. If Private is
selected, the static route is not reported in RIP.
4. Select the Active check box to make this
route effective.
5. T
ype the destination IP address of the final destination.
6. T
ype the IP subnet mask for this destination. If the destination is a single host, type
255.255.255.255.
7. T
ype the gateway IP address, which has to be a router on the same LAN segment as the
WNDRMAC router.
8. T
ype a number between 1 and 15 as the metric value.
This value represents the number of routers between your network and the destination.
Usually
, a setting of 2 or 3 works, but if this is a direct connection, set it to 1.
9. Click Apply to
add the static route.