Owner's Manual
Table Of Contents
- N150 Wireless Router WNR1000 User Manual
- Contents
- About This Manual
- Chapter 1 Configuring Basic Connectivity
- Chapter 2 Safeguarding Your Network
- Choosing Appropriate Wireless Security
- Recording Basic Wireless Settings Setup Information
- Changing Wireless Security Settings
- Viewing Advanced Wireless Settings
- Using Push 'N' Connect (Wi-Fi Protected Setup)
- Restricting Wireless Access by MAC Address
- Changing the Administrator Password
- Backing Up Your Configuration
- Understanding Your Firewall
- Chapter 3 Restricting Access From Your Network
- Chapter 4 Customizing Your Network Settings
- Chapter 5 Fine-Tuning Your Network
- Chapter 6 Using Network Monitoring Tools
- Chapter 7 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Related Documents
- Index
N150 Wireless Router WNR1000 User Manual
A-2 Technical Specifications
v1.0, January 2009
Wireless
Wireless Communication
Enabled
SSID Name
NETGEAR
Security Disabled
Wireless Access List (MAC Filtering)
All wireless stations allowed
Broadcast SSID Enabled
Transmission Speed Auto
*
Country/Region United States (North America only; otherwise
varies by country and region)
RF Channel
6 until region selected
Operating Mode 150 Mbps
Data Rate Best
Output Power Full
Firewall
Inbound (communications coming in from the Internet) Disabled (bars all unsolicited requests except
for traffic on port 80, the http port)
Outbound (communications going out to the Internet) Enabled (all)
*. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network
overhead lower actual data throughput rate.
Table A-1. WNR1000 Router Default Configuration Settings (continued)