Owner's Manual

N150 Wireless Router WNR1000 User Manual
Index-4
v1.0, January 2009
port triggering
configuring 5-9
example 5-3
portmap table 5-13
power adapter specifications A-3
Power light, troubleshooting and 7-2
Powerline HD products 5-17
PPPoE (PPP over Ethernet) 1-9
PPTP (Point to Point Tunneling Protocol) 1-9
Preamble mode 2-12
primary DNS server 1-7, 1-10
printing manual xii
protocols, compatibility A-3
Push ’N’ Connect 2-12, 6-3, 7-4
push button configuration (WPS) 2-13
R
radio, wireless 1-12, 2-11, 6-3
range, router 5-14
reducing interference 5-14
reference documents B-1
region of operation 2-7
registering product ii
releasing connection status 6-4
remote devices, testing path 7-10
remote management 6-10
renewing connection status 6-4
requirements, speed 5-17
reserved IP adresses 4-4
Resource CD 1-1
restarting network 7-1
restoring
configuration 6-6
default factory settings 7-12
restoring firmware 7-3
restricting access by MAC address 2-18
revision history xiii
RIP (Router Information Protocol) direction 4-2
route name 4-10
router PIN 2-15, 2-16
router status, viewing 6-1
S
scheduling blocking 3-5
secondary DNS server 1-7, 1-10
security
options, compared 2-2
setting up 2-1
security PIN 2-15, 2-16
service name 1-9
service numbers 3-4
services, blocking 3-3
setting time 3-8
settings, default. See default factory settings
setup information, gathering 2-5
Setup Manual 1-1
Setup Wizard 1-5
Shared Key authentication 2-5, 2-8
SMTP server 3-7
software push button configuration (WPS) 2-13
specifications
technical A-1
speed requirements 5-17
SPI (Stateful Packet Inspection) firewall 4-6
spoofing MAC addresses 1-7, 7-7
SSID 1-11, 2-7, 6-3
SSID broadcast 1-12, 2-11
standards, compatibility A-3
static IP addresses 1-7
static routes 4-8
statistics, usage 6-4
status, viewing 6-1
streaming video and audio 5-17
subnet mask
4-2, 6-2
system up time 6-4