Owner's Manual
Table Of Contents
- N150 Wireless Router WNR1000 User Manual
- Contents
- About This Manual
- Chapter 1 Configuring Basic Connectivity
- Chapter 2 Safeguarding Your Network
- Choosing Appropriate Wireless Security
- Recording Basic Wireless Settings Setup Information
- Changing Wireless Security Settings
- Viewing Advanced Wireless Settings
- Using Push 'N' Connect (Wi-Fi Protected Setup)
- Restricting Wireless Access by MAC Address
- Changing the Administrator Password
- Backing Up Your Configuration
- Understanding Your Firewall
- Chapter 3 Restricting Access From Your Network
- Chapter 4 Customizing Your Network Settings
- Chapter 5 Fine-Tuning Your Network
- Chapter 6 Using Network Monitoring Tools
- Chapter 7 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Related Documents
- Index
N150 Wireless Router WNR1000 User Manual
Configuring Basic Connectivity 1-3
v1.0, January 2009
– The Checking for Firmware Updates screen appears unless you previously cleared the
Check for Updated Firmware Upon Log-in check box.
This message displays if the router discovers that new firmware is available. (If no new
firmware is available, the router will proceed to the router status screen.)
– To automatically update to the new firmware, click Yes to allow the router to download
and install the new firmware file from NETGEAR.
The update process typically takes about 1 minute. When the upload is complete, your router
automatically restarts.
Figure 1-2
Figure 1-3
Warning: When uploading firmware to the N150 Wireless Router, do not
interrupt the Web browser by closing the window, clicking a link, or
loading a new page. If the browser is interrupted, it could corrupt the
firmware.