Operation Manual

XAV101 Powerline AV Ethernet Adapter User Guide
2-4 Using the XAV101 Configuration Utility
v2.0, January 2009
Using the Firmware Upgrade Tool
When you install the configuration utility, it also installs the firmware upgrade tool. Be sure the
adapter you will upgrade is plugged in to a power source, and connected to your computer with an
Ethernet cable before you run the Upgrade Tool.
Quality This indicates the type of traffic that can be handled smoothly: HD Video, DVD
Video, or Data.
• HD Video. The device can handle high-definition video traffic smoothly. This
status will be shown if the transmit and receive link speed is greater than
80 Mbps.
• SD Video. The transmit and receive link speed is greater than 50 Mbps.
• Data. The device cannot handle video data smoothly. This status will be shown
if the transmit or receive link speed is less than 50 Mbps.
Link Rate (Mbps) The link rate for each Powerline device.
LED Status The LEDs are enabled by default.
Firmware Version The firmware version for each Powerline device.
Note: Use the provided stand alone firmware upgrade tool to update the
firmware. See “Using the Firmware Upgrade Tool.”
Rename button Change a device name.
Factory Reset button Reset a device to its factory defaults. See “Resetting to Factory Defaults” on
page 2-6.
LED On/Off button Enable or disable the LEDS for a Powerline device.
Scan button Scan the network for Powerline devices.
Table 2-1. Configuration Utility Main Tab (continued)
Field or Button Description