Powerline Nano500 Set XAVB5101 Installation Guide
© 2012 NETGEAR, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc. DO NOT stack equipment, or place equipment in tight spaces or in drawers. Be sure your equipment is surrounded by at least 2 inches of air space. Technical Support Thank you for choosing NETGEAR.
Package Contents XAV5101 Powerline Adapters Ethernet cables (2) Products sold in some locations include a Resource CD. WARNING!! Do not plug Powerline devices into a power strip.
Hardware Features Power LED Powerline LED Ethernet LED Security button Factory Reset button Ethernet port 4
LED Descriptions The LEDs indicate the status of your Powerline adapters. • When you plug in the adapter, the Power LED turns green. lights up and The adapter is not active when no Ethernet link has occurred for more than 10 minutes. The adapter enters power saving mode, . and the Power LED turns amber • • The Powerline LED turns on when the adapter detects at least one other compatible Powerline device.
Button Descriptions The buttons on your Powerline adapters let you do the following: • • Factory Reset — Use the Factory Reset button to return your Powerline device to its default factory settings. Press and hold the Factory Reset button for an interval between 1 and 5 seconds, and then release it. Security button — Use the Security button to set the security between Powerline devices. Press and hold the Security button for an interval between 2 and 5 seconds, and then release it.
Install Your Powerline Adapters Set up a secure Powerline network with two Powerline adapters. Step 1. Plug in the two Powerline adapters. Step 2. On each adapter, press the Security button for > 2, but < 5 seconds, and then release. The Powerline LED starts blinking. The Power LED stops blinking. The Powerline LED turns on. Security pairing is done.
Add a new Powerline adapter to the secure Powerline network. Step 1. Plug in the new adapter. Step 2. Press the Security button on the new adapter and on one of the existing adapters. The Power LED starts blinking. The Power LED stops blinking. The Powerline LED turns on. The new adapter joins the network.
Technical Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. Registration is required before you can use the telephone support service. Registration through the NETGEAR website is strongly recommended. Go to http://support.netgear.com for product updates and web support.
Compatible NETGEAR Powerline Devices Your Powerline adapter can share a Powerline network with these compatible NETGEAR devices: XAV101, XAV1004, XAV2001, XAV1101, XAV1301, XAV1601, XAV2501, XAV2602, XAV5001, XAV5501, XAV5601, and XAV5004. For a complete list of HomePlug AV certified devices, go to www.homeplug.org/certified_products.
Compliance Declarations of Conformity For complete DoC please visit the NETGEAR EU Declarations of Conformity website at: http://support.netgear.com/app/answers/detail/a_id/11621/. For GNU General Public License (GPL) related information, please visit http://support.netgear.com/app/answers/detail/a_id/2649. WARNING: Do not stack equipment or place equipment in tight spaces, in drawers, or on carpets. Make sure your equipment is surrounded by atleast 2 inches of air space.
NETGEAR, Inc.