Universal WiFi Extender - Powerline Edition (XAVN2001) Installation Guide
Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. Phone (US only): 1-888-NETGEAR Phone (Other Countries): Visit http://support.netgear.com/general/contact/default.aspx.
Contents Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 LED Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Button Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Install the Extender and Surf the Web with WiFi . . . . . . . . . . . . 6 Install NETGEAR genie. . . . . . . . . . . . . . . . . . . . . . . . . .
Package Contents XAVN2001 Ethernet cable NETGEAR recommends that you do not plug a Powerline device directly into a power strip.
Hardware Features Universal WiFi Extender - Powerline Edition (XAVN2001) Power LED Powerline LED Wireless LED Security button Factory Reset button Ethernet port 3 On/Off switch Ethernet LED
LED Descriptions The LEDs indicate the status of your Powerline device. • When you plug in the Powerline device, the Power LED lights and turns green. • The Ethernet LED lights and turns green when you connect a powered-on Ethernet device to at least one Ethernet port. If the LED is off, there is no Ethernet connection. The Wireless LED lights and turns green when the wireless radio is on. • • The Powerline LED lights when the Powerline device detects at least one other compatible Powerline device.
Button Descriptions The buttons on your Powerline device let you do the following: • • • Factory Reset button: Use the Factory Reset button to return your Powerline device to its default factory settings. Press the Factory Reset button for 2 seconds, and then release it. Power On/Off switch: Use the On/Off switch to turn the device on and off. Security button: The Security button has three functions: - Secure the Powerline network.
Install the Extender and Surf the Web with WiFi 1. Secure your Powerline network. These instructions assume that you already have a Powerline network that includes at least 2 Powerline devices and that you want to add the XAVN2001 to your network. Reset Make sure that the Power LED on each Powerline device is solid green. Reset a. b. On a Powerline device that is connected to your existing Powerline network, press the Security button for 2 seconds, and then release the button.
Reset Reset c. Within two minutes, press the Security button on the XAVN2001 for 2 seconds, and then release the button. Reset Reset d. After a few seconds, the security is set. The Power and Powerline LEDs turn solid green. The Powerline devices can communicate over the Powerline network in a secure way.
2. Plug one of your Powerline devices into a wall outlet near your router or gateway. If you want to share Internet access across your home, make sure to connect the Powerline device to your Internet gateway with an Ethernet cable. Existing Powerline Network Room 1 Reset Reset Room 2 Powerline device is connected to router or gateway.
3. Plug the XAVN2001 into a wall outlet where you need WiFi coverage.
Note: You can connect an Ethernet-based device (like a game console, set-top box, or Blu-ray player) to the Internet and the home network with the additional Ethernet port on the XAVN2001. This room has an XAVN2001 Powerline access point.
4. Set up WiFi access on your XAVN2001 extender. You can set up WiFi access on your XAVN2001 extender in one of three ways: • Option 1: Use the WPS button on your wireless router or gateway to clone your existing wireless network. a. Press and hold the Security button on the XAVN2001 (about 10 seconds) and release it. The Wireless LED starts to blink. b. Press the WPS button on the wireless router or gateway. When the Wireless LED stops blinking, the cloning is finalized.
• Option 2: Use NETGEAR genie to manually configure the wireless settings of your XAVN2001 extender. a. Install NETGEAR genie. (See Install NETGEAR genie on page 20.) b. Temporarily connect your computer directly to the XAVN2001 through the Ethernet port. c. Launch NETGEAR genie on your computer and click Network Map or select it from the menu.
d. Click the Powerline icon on the Network Map screen. The Powerline Utility screen displays: Powerline icon XAVN2001 icon e. On the Powerline Utility screen, right-click the XAVN2001 icon.
f. From the pop-up menu that displays, select Wireless configuration. g.
If you want to clone your existing wireless network, enter the same wireless settings that your router or gateway uses. When you are roaming in your house, your wireless client (laptop, tablet, or smartphone) switches from one network (router or gateway) to the other (XAVN2001), depending on the signal quality. If you want to create a new wireless network, enter new wireless settings. Creating a new wireless network lets you have a second network in another zone of your house. h.
• Option 3: Use the web browser setup guide to manually configure the wireless settings of your XAVN2001 extender. On your computer or wireless device (tablet, smartphone): a. Open the software that manages your wireless network connections and connect to the XAVN2001 network. Tip: The default wireless network name (SSID) of the XAVN2001 is NETGEAR_EXT. The default network key (wireless security password) is printed on the back of the XAVN2001.
b. On the same computer or wireless device, open a web browser window. The browser takes you directly to the onscreen setup guide. If it does not, enter one of the following into the browser address bar: www.mywifiext.net www.netgearextender.net c. When prompted to log in, enter: • User name: admin • Password: password The web browser setup guide helps you configure the wireless settings of the XAVN2001.
If you want to clone your existing wireless network, enter the same wireless settings that your router or gateway uses. If you want to create a new wireless network, enter new wireless settings. Creating a new wireless network lets you have a second network in another zone of your house.
5. Connect your wireless client (laptop, tablet, or smartphone) to the XAVN2001 for Internet access. • Option 3: Use the WPS button on your wireless client to automatically connect to the XAVN2001 access point. a. Press the Security button on the XAVN2001 for 2 seconds and release it. The Wireless LED starts to blink. b. Press the WPS button on your Wireless client for 2 seconds and release it.
Install NETGEAR genie Follow these instructions to download and install NETGEAR genie on your computer. 1. Type http://support.netgear.com into your browser address bar. 2. Click the For Home button. 3. In the search box, type xavn2001. 4. Download the NETGEAR genie that corresponds to your OS environment (Windows or Mac). 5. Run the file that you downloaded and follow the onscreen instructions to install NETGEAR genie.
Compatible NETGEAR Powerline Devices Your Powerline device can share a Powerline network with these compatible NETGEAR devices: XAVB1301, XAVB1401, XAVB2101, XAVB2602, XAVNB2001, XAVB5601, XAVB5101, XAVB5201, XAVB5602, XAUB2511, XAVB5004, XAVB1004, XWNB5602, XWNB5201, and XWNB1601. For a complete list of HomePlug AV certified devices, visit www.homeplug.org/certified_products.
Safety Information AC input: 100–240V, 250 mA or 0.25A (max.) Operating temperature: 0°C–40°C User Manual You can get the user manual online at http://downloadcenter.netgear.com or through a link in the product’s user interface. Compliance For the complete EU Declaration of Conformity, visit http://support.netgear.com/app/answers/detail/a_id/11621/. This symbol appears in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE directive).
NETGEAR, Inc.
