User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Routing
363
M6100 Web Management User Guide
11. Click Apply to send the updated configuration to the switch. Configuration changes take
effect immediately.
12. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
Table 148, IPv6 MLD Routing Interface Configuration describes the non-configurable data
that is displayed.
Table 148. IPv6 MLD Routing Interface Configuration
Field Description
Operational Mode The operational status of MLD on the Interface.
Robustness The robustness parameter for the selected interface. This variable allows
tuning for the expected packet loss on a subnet. If a subnet is expected to be
lossy
, the robustness variable may be increased. MLD is robust to
(robustness variable-1) packet losses. The default value is 2.
IPv6 MLD Routing Interface Statistics
To display the IPv6 Multicast MLD Routing Interface Statistics page, click Routing IPv6
Multicast
MLD Routing Interface Statistics. The following page is displayed.
Table 149, IPv6 MLD Routing Interface Statistics describes the non-configurable data that is
displayed.
Click Update to update the page with the latest information on the switch.
Table 149. IPv6 MLD Routing Interface Statistics
Field Description
Interface The interface for which data is to be displayed.
Querier Status Indicates whether the selected interface is an MLD Querier or non-querier on
the subnet it is associated with.
Querier IP The address of the MLD Querier on the IP subnet to which the selected
interface is attached.
Querier Up Time The time in seconds since the MLD interface Querier was last changed