Operation Manual

8. To change a device in the table on the Wireless Card Access List page, do the following:
a. Select the radio button for the device in the table.
b. Click the Edit button.
The Edit Wireless Card page displays.
c. Change the settings as needed.
d. Click the Accept button.
The changes for the device show in the table on the Wireless Card Access List page.
9. To delete a device from the table on the Wireless Card Access List page, do the following:
a. Select the radio button for the device.
b. Click the Delete button.
The device is removed from the table.
10. When your list of devices is complete, select the Turn Access Control On check box.
You can also compose the list but turn on access control later. In that situation, leave
the Turn Access Control On check box cleared.
Note
WARNING:
If you select the Turn Access Control On check box but did not add any devices
to the ACL, all WiFi devices will be blocked from accessing the WiFi network
after you click the Apply button.
11. Click the Apply button.
Your settings are saved. If you selected the Turn Access Control On check box, WiFi devices that are
not in the ACL cannot connect to the WiFi network of the router.
Control Access to the Internet
72
XR500 Nighthawk Pro Gaming Router