Installation Manual

Table 1. LEDs on model XS708T switch (Continued)
DescriptionLED
10G LED:
• Off: No SFP+ module link is established.
• Solid. A valid 10 Gbps link is established.
• Blinking. The SFP fiber port is transmitting or receiving
packets at 10 Gbps.
Speed and ACT
LEDs for SFP+
slots 7F and 8F
1G LED
• Off. No SFP+ module link is established.
• Solid. A valid 1 Gbps link is established.
• Blinking.The module is transmitting or receiving packets
at 1 Gbps.
Hardware Overview Model XS712Tv2
The following sections describe the physical characteristics of model XS712Tv2.
Front Panel Model XS712Tv2
The switch provides twelve 100M/1G/10G copper RJ-45 ports, of which port 11T and slot 11F form one
combo port and port 12T and slot 12F form another combo port.The 1G and 10G SFP+ slots (11F and 12F)
accept copper or fiber modules.You use either port 11T or port 11F, and similarly, either port 12T or port
12F. Each copper RJ-45 port is capable of sensing the line speed and negotiating the duplex mode with the
link partner automatically.
The following figure shows the front panel of the model XS712Tv2.
Figure 3. Front panel model XS712Tv2
DescriptionNumber
Power and Fan LEDs.1
Recessed Reset button to restart the device.2
Recessed Factory Defaults button to restore the device back to the factory defaults.3
Hardware Overview
13
8-Port, 12-Port, and 16-Port Gigabit Smart Managed Pro Switch