Installation Manual
Table 2. LEDs on switch
DescriptionLED
• Solid green. The device is powered on.
• Solid yellow.The device is booting.
• Off. Power is not supplied to the device.
Power LED
• Solid yellow.The fans have failed.
• Off. The fan is operating normally.
Fan LED
• Off: No link is established.
• Solid green: A valid 1000 Mbps link is established.
• Blinking green. The port is transmitting or receiving
packets at 1000 Mbps.
• Solid yellow. A valid 10 or 100 Mbps link is established.
• Blinking yellow.The port is transmitting or receiving
packets at 10 or 100 Mbps.
Speed and ACT
LEDs for copper
ports 1 to 12
10G LED:
• Off: No SFP+ module link is established.
• Solid. A valid 10 Gbps link is established.
• Blinking. The SFP fiber port is transmitting or receiving
packets at 10 Gbps.
Speed and ACT
LEDs for SFP+
slots 11F and 12F
1G LED
• Off. No SFP+ module link is established.
• Solid. A valid 1 Gbps link is established.
• Blinking.The module is transmitting or receiving packets
at 1 Gbps.
Hardware Overview Model XS716T
The following sections describe the physical characteristics of model XS716T.
Front Panel Model XS716T
The switch provides sixteen 100M/1G/10G copper RJ-45 ports, of which port 15 and slot 15F form one
combo port and port 16 and slot 16F form another combo port. The 1G and 10G SFP+ slots (15F and 16F)
Hardware Overview
15
8-Port, 12-Port, and 16-Port Gigabit Smart Managed Pro Switch