User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Switching Information User Manual211
5. In the TCP Port field, specify the TCP port for the target that monitors iSCSI traffic.
Up to 16 TCP ports can be defined in the system. The well-known iSCSI ports 860 and
3260 are configured as defaults but you can remove them as any other configured target.
6. In the IP address field, specify an IP address for the target that monitors iSCSI traf
fic.
The default is 0.0.0.0.
7. In the T
arget Name field, specify a name to assign to the target.
The iSCSI T
arget Name can be up to 233 characters in length.
8. Click the Add button.
The iSCSI targets configuration is added.
View iSCSI Sessions
To view information about active iSCSI sessions:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Switching > iSCSI >
Advanced > Sessions.