User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Routing User Manual317
This value controls the ICMP error packets. The default burst size is 100 packets. When
the burst interval is 0, then configuring this field is not a valid operation. The valid burst
size is 1 to 200.
9. Click the Apply button.
Your settings are saved.
View the IPv6 Route Table
To view the IPv6 Route Table:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Routing> IPv6 > Basic > Route T
able.
5. In the Routes Displayed list, select from the following:
• All Routes. Shows all active IPv6 routes.
• Best Routes Only. Shows only the best active routes.
• Configured Routes Only. Shows the routes configured by the user
.
6. T
o refresh the page with the latest information on the switch, click the Refresh button.
The following table describes the nonconfigurable information that is displayed.
Table 113. IPv6 Route Table
Field Description
Number of Routes The total number of active routes in the route table.
IPv6 Prefix The network prefix for the active route.
Prefix Length The prefix length for the active route.