User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure System Information User Manual38
5. To refresh the page, click the Refresh button.
The following table describes the nonconfigurable Fan Status information.
View the Temperature Sensor Information
You can view the current temperature of different system sensors using the Temperature
Status table. The temperature is instant and can be refreshed with the latest information on
the switch when the Refresh button is clicked. The maximum temperature of the CPU and
MACs depends on the actual hardware.
To view temperature information:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select System > Management > System Information > T
emperature Sensors.
Table 8. Fan Status
Field Description
Unit ID The unit ID of the switch to which the fan belongs.
System-1 The working status of the System-1 fan in each unit.
System-2 The working status of the System-2 fan in each unit.
System-3 The working status of the System-3 fan in each unit.