User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure OSPF and OSPFv3 User Manual407
View the OSPFv3 Neighbor Table and Clear OSPFv3
Neighbors
This page displays the OSPFv3 neighbor table list. This information is displayed only if
OSPFv3 is enabled, and there exists at least one OSPFv3-enabled interface having a valid
neighbor. You can also clear OSPFv3 neighbors.
To view the OSPFv3 neighbor table and clear OSPFv3 neighbors:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Routing > OSPFv3 >
Advanced > Neighbor Table.
5. T
o refresh the page with the latest information on the switch, click the Refresh button.
6. T
o clear all the neighbors in the table, click the Clear button.
LS Requests Sent The number of LS requests sent on this interface by this router.
LS Requests Received The number of LS requests received on this interface by this router.
LS Updates Sent The number of LS updates sent on this interface by this router.
LS Updates Received The number of LS updates received on this interface by this router.
LS Acknowledgements Sent The number of LS acknowledgements sent on this interface by this router.
LS Acknowledgements Received The number of LS acknowledgements received on this interface by this
router
.
Table 146. Advanced OSPFv3 Interface Statistics (continued)
Field Description