User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Quality of Service User Manual485
Configure a DiffServ Class
You can add a new DiffServ class name or rename or delete an existing class. You can also
define the criteria to associate with a DiffServ class. As packets are received, these DiffServ
classes are used to prioritize packets. You can use multiple match criteria in a class. The
logic is a Boolean logical-AND for this criteria. After creating a class, click the class link to the
Class page.
To configure a DiffServ class:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select QoS > DiffServ >
Advanced > Class Configuration.
Policy table The number of configured policies out of the total allowed on the
switch.
Policy Instance table The number of configured policy class instances out of the total allowed
on the switch.
Policy Attributes table The number of configured policy attributes (attached to the policy class
instances) out of the total allowed on the switch.
Service table The number of configured services (attached to the policies on
specified interfaces) out of the total allowed on the switch.
Table 185. DiffServ Status (continued)
Field Description