User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual561
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Security > T
raffic Control > Private Group > Private Group Membership.
5. In the Group ID list, select the group ID.
6. Use Port List to add the ports you selected to this private group.
The port list displays when at least one group is configured.
7. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information displayed on the page.
Table 204. Private Group Membership
Field Description
Group Name The name for the private group that you selected. It can be up to 24
non-blank characters long.
Group Mode The mode of the private group that you selected. The modes are as
follows:
• community
• isolated
When in isolated mode, the member port in the group cannot forward
its egress traf
fic to any other members in the same group. By default,
the mode is community mode. Each member port can forward traffic to
other members in the same group, but not to members in other groups.