User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual566
Configure a Private VLAN Host Interface
To configure a private VLAN host interface:
1. Launch a web browser.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Security > T
raffic Control > Private VLAN > Private VLAN Host Interface
Configuration.
5. In the Host Primary VLAN field, set the primary VLAN ID for Host
Association mode.
The range of the VLAN ID is 2–4093.
6. Use Host Secondary VLAN to set the secondary VLAN ID for Host
Association mode.
The range of the VLAN ID is 2–4093.
7. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information displayed on the page.
Table 206. Private VLAN Host Interface Configuration
Field Description
Interface Select the physical or LAG interface.
Operational VLAN(s) The operational VLANs.