User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual567
Configure a Private VLAN Promiscuous Interface
To configure a private VLAN promiscuous interface:
1. Launch a web browser.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Security > T
raffic Control > Private VLAN > Private VLAN Promiscuous
Interface Configuration.
5. Use Promiscuous Primary VLAN to set the primary VLAN ID for Promiscuous
Association
mode.
The range of the VLAN ID is 2–4093.
6. Use Promiscuous Secondary VLAN ID(s) to set the secondary VLAN ID list for
Promiscuous Association
mode.
This field can accept single VLAN ID or range of VLAN IDs or a combination of both in
sequence separated by ','.
You can specify individual VLAN ID, such as 10. You can
specify the VLAN range values separated by a hyphen, for example, 10-13. You can
specify the combination of both separated by commas, for example:
12,15,40–43,1000–1005, 2000. The range of the VLAN ID is 2–4093.
Note: The VLAN ID List given in this control replaces the configured
secondary VLAN list in the association.
7. Click the Apply button.
Your settings are saved.