User's Manual

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-100
v1.0, November 2010
no lacp actor admin state passive
Use this command to set the LACP actor admin state to active.
lacp actor port priority
Use this command to configure the priority value assigned to the Aggregation Port. The valid
range for <priority> is 0 to 255.
no lacp actor port priority
Use this command to configure the default priority value assigned to the Aggregation Port.
lacp actor system priority
Use this command to configure the priority value associated with the LACP Actor’s SystemID.
The range for <priority> is 0 to 65535.
Format no lacp actor admin state passive
Mode Interface Config
Default 0x80
Format lacp actor port priority <priority>
Mode Interface Config
Note: This command is only applicable to physical interfaces.
Format no lacp actor port priority
Mode Interface Config
Default 32768
Format lacp actor system priority <priority>
Mode Interface Config